Toyota Celica 2003 Page 57 Owner'S Manual Download

Page: 57 / 284

’03MY CELICA U (L/O 0208)

2003 CELICA from Aug. ’02 Prod. (OM20809U)

2. Fully extend the shoulder belt to put it

in the lock mode. When the belt is

then retracted slightly, it cannot be ex-
tended.

To hold the convertible seat securely,
make sure the belt is in the lock mode

before letting the belt retract.

3. While pressing the convertible seat

firmly against the seat cushion and

seatback, let the shoulder belt retract
as far as it will go to hold the convert-

ible seat securely.

CAUTION

Push and pull the child restraint sys-
tem in different directions to be sure

it is secure. Follow all the installation

instructions provided by its manufac-
turer.

Summary of Contents for Celica 2003





























































































































































































































































































Search results

Summary of Contents for Celica 2003

Reviews:

Related manuals for Celica 2003

Brands by name

Popular brands

Toyota Celica 2003, Owner'S Manual

Search results

Summary of Contents for Celica 2003

Reviews:

Related manuals for Celica 2003

Brands by name

Popular brands