Toyota Celica 2003 Page 54 Owner'S Manual Download

Page: 54 / 284

’03MY CELICA U (L/O 0208)

2003 CELICA from Aug. ’02 Prod. (OM20809U)

4. To remove the infant seat, press the

buckle

−

release button and allow the

belt to retract completely. The belt will
move freely again and be ready to

work for an adult or older child passen-

ger.

(B) CONVERTIBLE SEAT INSTALLATION
A convertible seat is used in forward

−

facing or rear

−

facing position depend-

ing on the child’s age and size. When

installing, follow the manufacturer’s in-
struction about the applicable child’s

age and size as well as directions for

installing the child restraint system.

CAUTION

Never install a rear

−

facing child re-

straint system on the front passen-

ger seat because the force of the

rapid inflation of the front passen-
ger airbag can cause death or seri-

ous injury to the child.

Summary of Contents for Celica 2003





























































































































































































































































































Search results

Summary of Contents for Celica 2003

Reviews:

Related manuals for Celica 2003

Brands by name

Popular brands

Toyota Celica 2003, Owner'S Manual

Search results

Summary of Contents for Celica 2003

Reviews:

Related manuals for Celica 2003

Brands by name

Popular brands