Toyota Celica 2003 Page 26 Owner'S Manual Download

Page: 26 / 284

’03MY CELICA U (L/O 0208)

2003 CELICA from Aug. ’02 Prod. (OM20809U)

3. SEAT CUSHION ANGLE ADJUSTING

KNOB

Turn the knob either way.

For easy access to the rear seat, do

this.

1. Lift the seatback angle adjusting lever

or press the pedal behind the seat-
back.
The seat will slide forward.

2. Move the seat to the front

−

most posi-

tion.

After passengers are in, lift up the seat-
back and return the seat until it locks.

CAUTION

After putting back the seat, try
pushing the seat forward and rear-

ward to make sure it is secured in

place.

Never allow anyone to rest their

foot on the release pedal while the

vehicle is moving.

—Moving passenger’s seat for

rear seat entry

Summary of Contents for Celica 2003





























































































































































































































































































Search results

Summary of Contents for Celica 2003

Reviews:

Related manuals for Celica 2003

Brands by name

Popular brands

Toyota Celica 2003, Owner'S Manual

Search results

Summary of Contents for Celica 2003

Reviews:

Related manuals for Celica 2003

Brands by name

Popular brands