Toyota 4Runner 1997, Operation Manual

Page: 158 / 221

WWW.MANUALS.WS
WWW.MANUALS.WS
164
Connecting point for 5VZ-FE engine
Connecting point for 3RZ-FE engine
Do not connect the cable to or near any
part that moves when the engine is
cranked.
NOTICE
When making the connections, do
not lean over the battery or
accidentally
let the jumper cables or
clamps touch anything except the
correct battery terminals or the
ground.
5. Start your engine in the normal way.
After starting, run it at about 2000 rpm
for several minutes with the accelera-
tor pedal lightly depressed.
6. Carefully disconnect the cables in the
exact reverse order: the negative
cable and then the positive cable.
7. Carefully dispose of the battery cover
cloths—they may now contain sulfuric
acid.
8. If removed, replace all the battery vent
plugs.
If the cause of your battery discharging is
not apparent (for example, lights left on),
you should have it checked.
If your engine stalls while driving
…
1. Reduce your speed gradually, keeping
a straight line. Move cautiously off the
road to a safe place.
2. Turn on your emergency flashers.
3. Try starting the engine again.
If the engine will not start, see “If your ve-
hicle will not start”.
If the engine is not running, the
power assist for the brakes and
steering will not work so steering
and braking will be much harder
than usual.
CAUTION
!
If your engine stalls while
driving