Toyota 4Runner 1997, Operation Manual

Page: 78 / 221

WWW.MANUALS.WS
WWW.MANUALS.WS
84
With A.D.D.
To shift from “H2” to “H4”, reduce your
speed to less than 80 km/h (50 mph) and
move the front drive control lever. You
need not depress the clutch pedal.
If you have trouble shifting in cold weath-
er, reduce your speed or stop the vehicle
and reshift.
Never move the front drive control
lever if wheels are slipping. Stop the
slipping or spinning before shifting.
CAUTION
!
To shift from “H4” to “H2”, simply move
the front drive control lever. Also, disen-
gage both the free-wheeling hubs for con-
tinued “H2” use.
This can be done at any vehicle speed.
You Need not depress the clutch pedal.
If the indicator light does not go off when
you shift the transfer into “H2”, drive
straight ahead while accelerating or de-
celerating, or drive in reverse.
SHIFTING BETWEEN “H4” AND “l4”
To shift from “H4” to “L4”, stop the ve-
hicle or reduce your speed to less than 8
km/h (5 mph). With your foot off the accel-
erator pedal. depress the clutch pedal and
move the front drive control lever.
To shift from “L4” to “H4”, depress the
clutch pedal and move the front drive con-
trol lever.
This can be done at any vehicle speed.
SHIFTING BETWEEN “H2” AND “H4”
To shift from “H2” to “H4”, move the
front drive control lever.
This can be done when the vehicle is
stopped, or moving straight ahead at
speeds of 40 km/h (25 mph) or less. If you
have trouble shifting, depress or release
the accelerator pedal momentarily while
pushing the front drive control lever.
Never move the front drive control
lever if wheels are slipping. Stop the
slipping or spinning before shifting.
CAUTION
!
To shift from “H4” to “H2”, simply move
the front drive control lever.
This can be done at any vehicle speed.
If the indicator light does not go off when
you shift the transfer into “H2”, drive
straight ahead while accelerating or de-
celerating, or drive in reverse.
(c) Shifting procedure (lever
type with automatic transmis-
sion)