Toyota 40--8FD35N, Manual

Page: 24 / 92

10 SWITCHES AND LEVERS
en‐25
10.17 Rear working light (Option)
Rear working light
(1)
(1) Rear working light
Rear working light is fitted to the right rear of
the overhead guard (to the left rear for mod­
els with optional Pre­cleaner).
Switch
(2)
(2) Rear working light switch
Rear working light switch Rear working light switch
ON ­ Upper position
OFF ­ Lower position
Rear working light switch (Selective lighting
condition)
%$&.21
Rear working light switch (Selective light­
ing condition)
ON ­ Upper position
OFF ­ Center position
BACK ON ­ Lower position
When the switch is at BACK ON position,
light turns on only when the direction control
lever is placed in reverse position.
10.18 Mini lever (Option)
10.18.1 Direction control lever
(1)
(2)
(1) Forward travel
(2) Reverse travel
Shift the lever to change the travel direction
between forward and reverse.
Forward travel ­ Push the lever forward
Reverse travel ­ Pull the lever backward
The neutral position is halfway between the
forward and backward position.
Forward and reverse travel speed can be ad­
justed by the amount the accelerator pedal is
depressed.
CAUTION
• Always operate the control lever from a normal seated position.
• The engine cannot be started unless the direction control lever is in the neutral position.
• Stop the truck before shifting between forward and reverse.
NOTICE
• To restart powered travel after the activation of OPS, release the accelerator pedal, return
the direction control lever to the neutral position and sit in the seat. Sitting in the seat
without returning the direction control lever to the neutral position will not allow powered
travel.
• The position of the direction control lever may vary depending on the truck specifications.
10