Toyota 40--8FD35N, Manual

Page: 13 / 92

7 SAS FUNCTION
en‐14
ACTIVE MAST BACKWARD TILT SPEED CONTROL
This function automatically reduces the backward tilt speed of the mast at a lift height higher
than approximately 6 feet (2 m) in order to prevent the load from shifting.
▪ At a high lift height, the backward tilting speed is automatically limited regardless of the
load weight. When lowering from a high lift height to a lower lift height while tilting the
mast backward, the tilting speed will not change.
▪ At a low lift height, the backward tilting speed is not limited even if there is a load. When
lifting from a low lift height to a higher lift height while tilting the mast backward, the tilting
speed will not change.
▪ When operating the tilt lever backward while pressing the tilt knob switch at any lift height,
the backward tilting speed is limited as long as the tilt lever knob switch is pressed (ex­
cept trucks equipped with Mini lever or Joy stick).
KEY­LIFT INTERLOCK
When the key switch is turned off, the forks will not lower even if the lift lever is operated. The
forks can be lowered when the operator is seated in the operator's seat and key switch is
turned on.
ACTIVE STEERING CONTROL
If the steering wheel knob is not at the same angle as the steer tires, such out­of­position will
be automatically corrected while turning the steering wheel. Thus, the knob is kept at a
constant position relative to the steer tires.
SHOULD A PROBLEM WITH SAS OCCUR:
The truck with SAS is equipped with a controller, sensors and various switches. Should one or
more of these components experience a problem, the following may occur:
▪ The automatic fork leveling control, active mast forward tilt angle control and/or active
mast backward tilt speed control may not operate properly.
▪ The swing lock cylinder may be locked.
▪ Steering wheel knob position may not be corrected automatically even if it is out­of­posi­
tion.
Should any of the above occur, you can expect the following:
▪ An error code will be displayed in the hour meter.
▪ The diagnosis indicator lamp will illuminate or blink.
Should one or more of these conditions occur, move the truck to a safe location, apply the
parking brake and ask the Toyota dealer for an inspection and repair.