- 69 -
00500343
2. AFTER INSTALLATION
CAUTION
2-1. CHARGING REFRIGERANT (HFC-134a)
For additional information on charging refrigerant using the charging cylinder, refer to
“GENERAL INFORMATION / AFTER INSTALLATION”
.
CAUTION
2-2.RE-ADJUSTMENT OF COMPRESSOR BELT
To correct belt deflection caused by initial elongation, the air conditioning must be operated for at least 5 minutes before
the final adjustment of the belt.
CAUTION
Refer to the separate manual
"
GENERAL INFORMATION/AFTER INSTALLATION"
for details on what to do after
installation. (Document code: AOUMC-01*/Document part number: 988963-476*)
STANDARD AMOUNT OF REFRIGERANT
500
±
50 g (1.10
±
0.11 lbs)
Ensure to fill the refrigerant to the specified amount.
Belt deflection
[at 98 N (10kgf, 22lbf) force]
Belt tension
[N (kgf, lbf)]
Vehicle equipped with
1CD-FTV
11.1 - 13.4 mm
(0.44 - 0.52 inch)
392
±
98 N
(40
±
10 kgf, 88
±
22 lbf)
1. Excessive tension of belt may have an adverse effect on bearings, while excessive slackness can cause the belt
to slip, make abnormal noise or shorten the belt life.
2. The belt deflection must be measured between the specified pulleys as indicated in this manual.
3. The belt tension must be measured between the specified pulleys as indicated in this manual.
4. The belt tension must be adjusted to the center of the specified belt tension range.
