- 45 -
00500343
(d) Hand tighten the idle pulley lock nut before
installing the drive belt.
(e) Install the compressor drive belt. (Supplied in the
kit)
(f)
Adjust the belt tension using the adjusting bolt,
check the belt tension using the belt tension
gauge.
(g) Tighten the idle pulley lock nut.
CAUTION
Belt tension using
the belt tension
gauge
Belt deflection at
98 N (10 kgf, 22 lbf)
force
New belt
735 ± 118 N
(75
±
12 kgf, 165 ±
26 lbf)
8.4 - 10 mm
(0.33 - 0.39 inch)
Used belt 392
±
98 N
(40
±
10 kgf, 88
±
22 lbf)
11.1 - 13.4 mm
(0.44 - 0.52 inch)
Tightening Torque :
39.2 N•m (400 kgf•cm, 28.9 ft•lbf)
Use the Hand tool (09812-00020) to tighten the lock
nut.
P/S PUMP
PULLEY
IDLE
PULLEY
COMPRESSOR
PULLEY
CRANKSHAFT
PULLEY
BC0729
LOCK
NUT
1
2
3
4
5
(h) Connect the vehicle harness (3-p) to the Mg.
clutch harness.
BC0730
FRONT
VEHICLE HARNESS
(3 - P)
COMPRESSOR
Mg.CLUTCH
HARNESS
COMPRESSOR
1
VEHICLE
HARNESS
(3 - P)
2
3
4
2
1
