Toyota 2006 RAV4 Owner'S Manual Download Page 24

Page: 24 / 417

’06 Rav4_U (L/O 0601)

2005 RAV4 from Jan. ’06 Prod. (OM42620U)

Do not bend the key grip.

Do  not  cover  the  key  grip  with  any
material  that  cuts  off  electromagnet-
ic  waves.

Do not knock the key hard against
other objects.

Do  not  leave  the  key  exposed  to
high  temperatures  for  a  long  period,
such  as  on  the  dashboard  and  hood
under  direct  sunlight.

Do not put the key in water or
wash it in an ultrasonic washer.

Do not use the key with electromag-
netic materials.

KEY NUMBER PLATE

Your  key  number  is  shown  on  the  plate.
Keep  the  plate  in  a  safe  place  such  as
your  wallet,  not  in  the  vehicle.

If  you  should  lose  your  keys  or  if  you
need  additional  keys,  duplicates  can  be
made  by  a  Toyota  dealer  using  the  key
number.

We recommend writing down the key num-
ber and storing it in a safe place.

Summary of Contents for 2006 RAV4


































































































































































































































































































































































































































Search results

Summary of Contents for 2006 RAV4

Reviews:

Related manuals for 2006 RAV4

Brands by name

Popular brands

Toyota 2006 RAV4, Owner'S Manual

Search results

Summary of Contents for 2006 RAV4

Reviews:

Related manuals for 2006 RAV4

Brands by name

Popular brands