Toyota 2006 RAV4 Owner'S Manual Download Page 94 | Manualshive

Page: 94 / 417

background image

’06 Rav4_U (L/O 0601)

84

2005 RAV4 from Jan. ’06 Prod. (OM42620U)

CAUTION

To  avoid  potential  death  or  serious
injury  when  the  front  passenger  occu-
pant  classification  system  does  not
detect  the  conditions  correctly,  ob-
serve  the  following.

!

Make  sure  the  “AIRBAG  ON”  indica-
tor  light  is  illuminated  when  using
the  seat  belt  extender  for  the  front
passenger  seat.  If  the  “AIRBAG
OFF”  indicator  light  is  illuminated,
disconnect

the

extender

tongue

from  the  seat  belt  buckle,  then  re-
connect  the  seat  belt.  Reconnect
the  seat  belt  extender  after  making
sure  the  “AIRBAG  ON”  indicator
light  is  illuminated.  If  you  use  the
seat  belt  extender  while  the  “AIR-
BAG  OFF”  indicator  light  is  illumi-
nated,  the  front  passenger  airbag
and  side  airbag  on  the  front  pas-
senger  side  may  not  activate  cor-
rectly,  which  could  cause  death  or
serious  injury  in  the  event  of  colli-
sion.

!

Do  not  recline  the  front  passenger
seatback  so  far  that  it  touches  a
rear/second  seat.  This  may  cause
the  “AIRBAG  OFF”  indicator  to  be
illuminated,  which  indicates  that  the
passenger’s  airbags  will  not  deploy
in  the  event  of  a  severe  accident.
If  the  seatback  touches  the  rear/
second  seat,  return  the  seatback  to
a

position

where

it

does

not

touches the rear/second seat.

Keep  the  front  passenger  seatback
as  upright  as  possible  when  the  ve-
hicle  is  moving.  Reclining  the  seat-
back  excessively  may  lessen  the  ef-
fectiveness  of  the  seat  belt  system.

!

If  an  adult  sits  in  the  front  passen-
ger  seat,  the  “AIRBAG  ON”  indica-
tor  light  should  be  illuminated.  If
the  “AIRBAG  OFF”  indicator  is  illu-
minated,  ask  the  passenger  to  sit
up  straight,  well  back  in  the  seat,
feet  on  the  floor,  and  with  the  seat
belt  worn  correctly.  If  the  “AIRBAG
OFF”  indicator  still  remains  illumi-
nated,  either  ask  the  passenger  to
move  to  the  rear/second  seat,  or  if
that  is  not  possible,  move  the  front
passenger  seat  fully  rearward.

!

Wear the seat belt properly.

!

Make  sure  the  front  passenger’s
seat  belt  tab  has  not  been  left  in-
serted  into  the  buckle  before  some-
one  sits  in  the  front  passenger
seat.

!

Do  not  apply  a  heavy  load  to  the
front  passenger  seat  or  equipment
(e.g.  seatback  pocket).

!

Do  not  put  weight  on  the  front  pas-
senger  seat  by  putting  your  hands
or  feet  on  the  front  passenger  seat
seatback  from  the  rear/second  pas-
senger  seat.

!

Do  not  let  a  rear/second  passenger
lift  the  front  passenger  seat  with
their  feet  or  press  on  the  seatback
with  their  legs.

!

Do not put objects under the front
passenger seat.

!

Child  restraint  systems  installed  on
the  rear/second  seat  should  not
contact  the  front  seatbacks.

«
...
92
93
94
95
96
...
»

Summary of Contents for 2006 RAV4


































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2006 RAV4

Brand: RAM Pages: 292

Brand: RAM Pages: 116

Indigo MANZA QUADRAJET 90

Brand: TATA Motors Pages: 10

Brand: Honda Pages: 85

Brand: Saab Pages: 12

Brand: Atera Pages: 3

Brand: Black Horse Pages: 5

Brand: Rugged Ridge Pages: 3

Brand: Buick Pages: 112

1993 Civic Coupe

Brand: Honda Pages: 201

Brand: Ace K9 Pages: 14

Brand: Buick Pages: 475

Brand: Haltech Pages: 12

Brand: Road Ranger Pages: 3

Brand: RAM Pages: 288

Brand: Enduro Pages: 56

Brand: Saab Pages: 9

Brand: Comtronics Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands