Toyota 2006 RAV4 Owner'S Manual Download Page 52

Page: 52 / 417

’06 Rav4_U (L/O 0601)

2005 RAV4 from Jan. ’06 Prod. (OM42620U)

4. Stow

the

rear/second

seat

belt

buckles as shown in the illustration.

This prevents the buckles from falling out
when you fold down the rear/second seat.

CAUTION

Before  using  the  seat  belt,  pull  out
the  buckle  and  make  sure  the  belt  is
not  twisted.

NOTICE

The seat belt buckles must be stowed
before you fold the seatback.

FOLDING DOWN REAR/SECOND SEATS

1. Hold the center of the lever and pull

it  up.  Then  slide  the  rear  seat  fully
backward  and  pull  it  forward  slightly
until  it  locks.

2. Lower the head restraint to the low-

est position.

Summary of Contents for 2006 RAV4


































































































































































































































































































































































































































Search results

Summary of Contents for 2006 RAV4

Reviews:

Related manuals for 2006 RAV4

Brands by name

Popular brands

Toyota 2006 RAV4, Owner'S Manual

Search results

Summary of Contents for 2006 RAV4

Reviews:

Related manuals for 2006 RAV4

Brands by name

Popular brands