Toyota 2006 RAV4 Owner'S Manual Download Page 55

Page: 55 / 417

’06 Rav4_U (L/O 0601)

2005 RAV4 from Jan. ’06 Prod. (OM42620U)

BEFORE FOLDING DOWN THIRD SEATS

1. Stow the third seat belt buckles as

shown in the illustration.

NOTICE

To  prevent  damage  to  the  seat  belt
buckles,  they  must  be  stowed  before
you  fold  down  the  seatback.

2. Pass the third seat belts through the

hangers.

This prevents the shoulder belt from being
damaged.

CAUTION

The seat belt must be removed from
the hanger when the seat belt is in
use.

STOWING THIRD SEATS

1. Lower the head restraint to the low-

est position.

—Stowing third seats for
luggage space

Summary of Contents for 2006 RAV4


































































































































































































































































































































































































































Search results

Summary of Contents for 2006 RAV4

Reviews:

Related manuals for 2006 RAV4

Brands by name

Popular brands

Toyota 2006 RAV4, Owner'S Manual

Search results

Summary of Contents for 2006 RAV4

Reviews:

Related manuals for 2006 RAV4

Brands by name

Popular brands