Toyota 1996 Celica, Owner'S Manual

Page: 90 / 203

83
The anti-theft system prevents the audio
system from working after it has been dis-
connected. To activate the system, you
must set a three-digit security code. After
the system is set, “SEC” will appear in the
display each time the ignition is turned
from “LOCK” to “ACC” or “ON”. Also, the
anti-theft light flashes every few seconds
while the ignition key is in the “LOCK”
position.
You will need to know your security code
to reactivate your radio after electrical ser-
vice is performed on your vehicle.
Choose a security code that is easy to re-
member and keep a copy of it (not in your
Toyota).
NOTICE
If you pushed any wrong buttons on
the anti-theft system, the following
messages will appear on the
display.
“Err”—You have pushed wrong
buttons.
“1-9”—Indicates the number of
errors you have made. You may
make up to nine errors, but no
more!
“HELP”—The number of errors
you can make was exceeded. The
audio sytem is completely inoper-
able. Contact you Toyota dealer.
Setting a security code for the first
time.
1. Turn off the audio system.
Turn ignition key to “ACC”.
Simultaneously push and hold in “1”, “6”,
and “PWR/VOL” until “SEC” appears on
the display.
2. While you are holding in the “
∧
” side of
“TUNE”, push “1”.
The display will read “- - -“.
On some modes, “
” and “ ” will also
turn on.
—Anti-theft system
(Type 2-2 and 3 only)
http://www.carownersmanual.net
carownersmanual.net
carownersmanual.net