Toyota 1996 Celica, Owner'S Manual

Page: 184 / 203

177
Vertical movement gauges: The bubble
on the gauge should be within two marks
from center on both sides. Horizontal movement gauges: The triangle
mark on the gauge should be within one
mark from the “O” position.
If a gauge reading is not within the accept-
able range, have the aiming adjusted by
your Toyota dealer.
The following illustrations show how to
gain access to the bulbs. When replacing
a bulb, make sure the ignition switch and
light switch are off. Use bulbs with the
wattage ratings given in the table.
Halogen bulbs have pressurized
gas inside and require special han-
dling. They can burst or shatter if
scratched or dropped. Hold a bulb
only by its plastic or metal case. Do
not touch the glass part of a bulb
with bare hands.
CAUTION
!
NOTICE
Only use a bulb of the listed type.
Light bulbs Bulb
No.
W Type
Headlights
(low beam) 9006 55 A
Headlights
(high beam) 9005 65 B
Front fog light - 55 C
Parking and front turn sig-
nal lights 1157 27/8 C
Front side marker lights 194 3.8 D
Rear side marker, stop
and tail lights (coupe) 1157 27/8 C
Replacing light bulbs—
http://www.carownersmanual.net
carownersmanual.net
carownersmanual.net