Toyota 1996 Celica, Owner'S Manual

Page: 92 / 203

85
Changing the security code
1. Turn off the audio system.
Turn the ignition key to “ACC”.
Simultaneously push and hold in “1”, “6”,
and “PWR/VOL” until “SEC” appears in
the display.
2. While you are holding in the “
∧
” side of
“TUNE” push “1”.
The display will read “- - -”.
On some models, “
” and “ ” will also
turn on.
3. Input the existing three-digit code.
You have 10 seconds to enter each digit.
For example, “209”:
To set the first digit: Push “1” until the digit
you want appears on the display.
To set the second digit: Push “2” until the
digit you want appears on the display.
To set the third digit: Push “3” until the digit
you want appears on the display.
http://www.carownersmanual.net
carownersmanual.net
carownersmanual.net