background image

DS4-2499D 

- 17 - 

   

15. Guarantee                  

       

                                                                                     

 

   

 

     

(1) Guarantee period 

       

  One (1) year after delivery to the specified place. 

 

     

(2) Scope of guarantee 

If the equipment is found to have a fault attributable to us during the guarantee period specified 
above, the faulty part will be replaced or repaired on our risk. This does not apply to: 

 

         

1) the faults resulting from the incorrect handling or misuse by the user 

         

2) those resulting from a cause not related with the equipment 

         

3) those resulting from the modification or repair by parties other than us, and 

         

4) those resulting from a natural disaster or accident beyond our control. 

 

For the purpose of this document, the guarantee applies to the equipment itself and does not apply 
to the secondary damage caused by the malfunction of the equipment. 

 
 

   

16. For Contact

                                                                       

 

 

For further information about the product, please contact our sales office nearby or the Machinery 
Division, Kamiya Factory. 

 
 

         

TOYO ELECTRIC CORP., Electric Machinery Div. 

 

       

Head Office

   

  Hikisawa 1-39, Kamiya-cho, Kasugai, Aichi, Japan 480-0393 

       

/Kamiya Plant 

TEL <0568> 88-1181    FAX <0568> 88-3086 

       

Tokyo Office 

(Uchikanda 282 Blg, No. 95) 15-9, Uchikanda 2-chome, Chiyoda-ku, Tokyo   
101-0047 

                   

 

TEL <03> 3256-6665    FAX <03> 3254-3650 

       

Kanagawa Office (City Mason, No. 203) Miyata-cho 1-4-17, Hodogaya-ku, Yokohama City, 

Kanagawa  240-0002 

                     

  TEL <045> 340-1766    FAX <045> 340-1767 

       

Nagoya Office

 

  156, Ajimi-cho 2-chome, Kasugai City, Aichi    450-0002 

                     

  TEL <0568> 35-3456    FAX <0568> 34-4666 

       

Toyota Office      1-15-8, Kosaka-honmachi, Toyota City, Aichi    471-0034 

                     

  TEL <0565> 37-8830    FAX <0565> 37-8832 

       

Osaka Office

   

(Osaka Godo Blg, No. 805) 1-5, Doyama-cho, Kita-ku, Osaka City    530-0027 

                     

  TEL <06> 6361-1626    FAX <06> 6312-6762 

       

Nishi-Nihon Office

 

(Abundant 90, No. 301) Hakata Eki Higashi 3-11-4, Hakata-ku, Fukuoka City, 

Fukuoka  812-0013 

                       

TEL <092> 413-2300    FAX <092> 413-2312 

 

                 

Website: URL   

http://www.toyo-elec.co.jp

 

 

*   Specifications, dimensions, etc. shown in this operation manual may be changed to reflect the 

performance improvement without notice. 

 

Summary of Contents for SOT-EQ80 Series



















Reviews: