Toyo SOT-EQ80 Series, Operation Manual, Page: 14 / 18

DS4-2499D
- 14 -
11. Signal Interface
*Note 1: For signal wires, use UTP (Unshielded twist pair) or STP (Shielded twist pair) cable of
category 3 or higher. Extension of cable shall be within 100 m.
*Note 2: For power wire, use electric wire of 0.3 mm
2
or more.
Extension of power wire shall be within 50 m if power voltage is 24VDC.
*Note 3: Voltage between DL – COM or ALM – COM shall be 30VDC or lower in OFF, and the
residual voltage in ON shall be 2V or so.
（ ２）
（ １）
ＧＮＤ
２ ４ Ｖ
Ｄ Ｌ
（ １）
ＴＤ＋
（ ２）
（ ３）
（ ６）
（ ４）
Ｆ Ｇ
ＡＬＭ （ ５）
（ ３） ＣＯＭ
Signal connector
ＴＤ−
ＲＤ＋
ＲＤ−
Connector shared by power and aux. output
Terminal No. Brevity code
Terminal No. Brevity code