，
。，：
。
www.taiden.com
!"
Please read safety instructions in installation and operating manual on CD before using the system. For any other resources, please visit our website: www.taiden.com.
Ceiling mounted
Install the ceiling mounting kit at the top of the
transceiver
φ
98mm
TO
P
TO
P
TO
P
TO
P
TO
P
TO
P
/
For hard ceiling
/
For sprung roof
5
30mm
Hold the spring straightly and vertically
，
!"#$%&'
Drill a mounting hole into the ceiling, insert the
cable and spring into the hole until the base of
the transceiver can fit with the ceiling
()*+,-./01，2
34567*+
M3
Drill two holes according to the position and put
the included rubber plugs into, then fix the
mounting bracket on the ceiling with M3 screws
!89:;<569= ->?@AB
9C
Put the slots of the transceiver into the mounting
bracket and fix it with clockwise rotation
，
Tripod mounted
/
djustable angle
For a
DE56('GHI)
Tripod (height adjustable)
73K
Fixed screw
M3
M3 screw
3L
7M
Stator
NO56
Flexible tube
bracket
2
3LPQ7
MRNO56S8
M3
Install the transceiver and
the stator at the ends of the
flexible tube bracket
7M!3L;<DE56+
V73K,>?@A1 XC
Aim the hole of the stator to the
fixed screw and fix it with
clockwise rotation
3L
Hole
/
ixed angle
For f
56=1!-
ABXC
Put the mounting bracket on
the button of the transceiver
and fix it with rotation
56!3L;<DE56
+V73K,>?@A1 XC
Aim the hole of the mounting
bracket to the fixed screw and
fix it with clockwise rotation
56
Mounting bracket
3L
Hole
73K
Fixed screw
DE56('GHI)
Tripod (height adjustable)
(HCS-5300TD&HCS-5300TH)
(HCS-5300TD&HCS-5300TH)
| HCS-5300T
#$%&
'()*+
Quick Reference Card of Installation | HCS-5300T Series Transceiver
