Thermostatic Mode
(Only for use where permitted)
(Operates the fireplace within a set tem-
perature range)
The fireplace is shipped with thermostatic
mode function deactivated. If this function is
permitted for use in your area it can be acti-
vated by depressing the recessed button on
the
back of the hand held remote. (Fig. #55)
Once activated the thermostat symbol (Fig.
#56) will be displayed when the thermostat
button is pressed
To activate a set point temperature:
1. Press the thermostat button to activate
the thermostat mode. The temperature
and thermostat symbols will appear.
2. Press and hold the thermostat button
on the lower right hand side of the hand
held remote for 5 seconds. (Fig. #57) The
temperature icon on the display will flash.
(Fig. #58)
3. While the temperature icon is flashing
use the up and down arrows to set the
temperature to the desired setting.
4. Once the desired setting is reached,
press the OK button. If the OK button
is not pressed the icon will continue to
flash for 5 seconds and then set itself to
the temperature displayed.
5. The fireplace is now in thermostatic mode.
To exit the thermostatic mode press the
program, manual or timer buttons. Please
note that the first press of the manual
button will turn the fireplace off.
THERMOSTATIC MODE
BUTTON
Fig. #56
THERMOSTAT SYMBOL
THERMOSTATIC BUTTON
Fig. #55
Fig. #57
TEMPERATURE SETTING
Fig. #58
31
TCWS.54CE3 270313-44
Summary of Contents for TCWS.54CE3
Page 40: ...40 TCWS 54CE3 2 0313 44 ...
Page 41: ...41 TCWS 54CE3 270313 44 ...
Page 42: ...42 TCWS 54CE3 2 0313 44 ...
