13. The rear media spacer is now installed.
(Fig. #11)
Set the air shutter to fully open
for Propane or fully closed for
Natural
gas.
14. Install rear burner by tilting the inlet
through the rear hole in the tray. Engage
the inlet with the rear orifi ce. This can be
seen from the back of the tray.
(Fig.
#12)
15. Install center media spacers and screw
down through burner and tray with 1 1/2”
screws. (Fig#13).
Three holes must line up to set each
screw.
TC54.NGO3C2 070211-16
Fig #11
Fig #12
Fig #13
REAR MEDIA SPACER
MEDIA SPACER
INSTALLATION
INSTALL REAR BURNER
6
Summary of Contents for TC54.NG03C2
Page 13: ...TC54 NGO3C2 070211 16 Notes 13 ...
Page 14: ...TC54 NGO3C2 070211 16 Notes 14 ...
