16. Install the left media spacer and secure
to front and rear media spacers with two
screws. (Fig. #14)
17. Install right media spacer and secure to
front and rear media spacers with two
screws. (Fig. #15)
18. Apply just enough glass media to cover
the burner assembly. (Fig #16 & 17)
Use caution not to get any glass media
into the pilot slots.
NOTE: Too much tumbled glass over the
burner will cause sooting with the use of
propane gas.
TC54.NGO3C2 070211-16
Fig #14
Fig #15
Fig #16
Fig #17
GLASS MEDIA PLACEMENT
RIGHT MEDIA SPACER
LEFT MEDIA SPACER
FINISHED INSTALLATION
OF GLASS MEDIA
7
Summary of Contents for TC54.NG03C2
Page 13: ...TC54 NGO3C2 070211 16 Notes 13 ...
Page 14: ...TC54 NGO3C2 070211 16 Notes 14 ...
