TOP STANDOFFS
Figure 10: Standoffs.
Figure 11: Location examples.
The top standoffs are shipped
loose inside the fireplace and must
be installed on top of the fireplace
as shown in Figure 10. Do this
once the fireplace is on site and in
position.
In planning the installation for the fireplace, it is necessary to determine where the unit is to be installed,
location of vent system and where gas supply piping may be plumbed. Various installations are possible, such
as, into an existing wall, a corner, a built-in wall or a wall projection (Figure 11). Due to high temperatures, do
not locate this fireplace in areas of high traffic or near furniture or draperies.
The minimum clearances from the fireplace to combustible surfaces must be adhered to and are
shown in Figure 6 and Figure 7.
EXAMPLES OF COMMON LOCATIONS
SEE FIG #15 FOR DIMENSIONS
9
TC36.CODE_271119-40
100003879
Locating The Fireplace
Top Standoffs
