- 30 -
tousek
/ EN_TPS-60-PRO_05 / 25. 03. 2020
After giving the
impulse to program
the end positions,
no other impulse
must be given. Also
the safety devices
mustn´t be triggered.
This would lead to
an interruption of
the programming
process.
In case of defect or power failure, unlock the drive as follows:
•
Disconnect the power
• Turn the cover
(A)
counterclockwise, until the hole
(B)
and the emergency release screw (
S)
are coincident.
Screw in screw
(S)
as far as possible.
• The controller detects the unlocking and shows the
message „motor unlocked“ on the display.
• Now it is possible to open and close the gate manually.
Re-commissioning: to restore the motor operation, unscrew
the screw
(S).
The cover
(A)
gets back to the starting position.
Important
•
After the re-set to the „locked“ position, the gate
must be moved manually until it audibly engages!
By giving the next impulse, the actuator looks for its open position (it is not necessary to re-programm the end positions).
7. Emergency release in case of power failure (Note for the user)
TPS 60 PRO
Ther image shows a motor in “locked” position.
Factory settings
7
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Operation mode
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Operation mode
Impulse mode
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Operation mode
auto. close 5s
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Operation mode
aut. close 10s
change? YES
confirm
time:
1–255s
e.g. 10s
7
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
System test
Photocell
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
System test
Main safety edge
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
System test
Side safety edge
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
End positions
being detected
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Open position
being detected
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Close position
being detected
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Ready for use
8
S
A
B
Impulse with
impulse button
or transmitter.
