TouchTunes Allegro MX-1v, Installation And Setup Manual, Page: 71 / 120

Testing the Payment Acceptors
65
The screen refreshes, indicating the denomination of the bill that was inserted, as well as the
origin of the bill (first or second bill acceptor).
Denomination
Source
Acceptor Status Message
By default, the bill acceptor is configured as follows:
• Accepts $1, $5, $10, and $20 bills only.
• Four-way bill direction.
• High security bill acceptance.
• Long pulse (do not change this setting).
To change the settings follow the directions on the side of the bill magazine.
3. Make sure that the bill is properly stacked. Instructions for removing the bill are located on
the rear of the bill acceptor magazine.
For the Canadian model only:
4. Repeat step 1, and insert a coin into the coin acceptor.
The screen refreshes, indicating the value of the coin that was inserted.
Testing the Credit Card Reader
To test the credit card reader:
1. In the Credit Card area, press TEST .
The Test screen displays.
Credit Card Test Screen