TouchTunes Allegro MX-1v, Installation And Setup Manual

Page: 47 / 120

Connecting Power to the Allegro MX-1
41
5. Connect left and right speakers to the amplifier by pressing their euroblock connectors firmly
into the left and right channel audio output connectors for Zone B on the amplifier.
6. Power up the unit by connecting the power cord between the Allegro MX-1’s internal power
supply and the power connector on the amplifier.
The amplifier will automatically start when the power cord is plugged into a wall outlet (AC
120V /60Hz MAX 1000W). There is no power switch.
CAUTION: Do not connect the AC power cord to a wall outlet until all audio
connections have been completed.
If the power/standby light is illuminated green, the amplifier is operating normally. Red indicates
that the amp is in standby mode or that an abnormal condition has been encountered and that
protection mode has been activated.
Connecting Power to the Allegro MX-1
In this section, connect the Allegro MX-1 to the main AC power, close the jukebox and then turn
it on in order to activate it.
Components within the Allegro MX-1 (such as the JCB and internal amplifier) are connected to
a main power supply inside the case. You connect the power cord for this power supply to an
external AC power source to provide power to jukebox components.
To connect the power cord to the jukebox:
1. If necessary, locate the power cord for the jukebox.
The power cord for the Allegro MX-1 is designed for a three-prong power outlet that is
properly grounded and polarized.
CAUTION: Do not modify the supplied power cord to fit in ungrounded or
unpolarized power outlets. If the power cord cannot plug into the intended AC
power outlet, either find another outlet or contact an electrician to replace the
existing outlet with one that is grounded and polarized.
2. Connect the female plug of the power cord to the power inlet on the rear of the cabinet.
AC power inlet on power supply
3. Connect the male plug of the power cord to a properly grounded and polarized three-prong
power outlet.