TouchTunes Allegro MX-1v Installation And Setup Manual Download Page 118 | Manualshive

Page: 118 / 120

TouchTunes Allegro MX-1v Installation And Setup Manual Download Page 118

112

Freight Claims and Shipment Damage

• If the purchaser receives the original product in damaged condition, notify TouchTunes

Interactive Networks Repair Department or Customer Service immediately. If the shipment was
made by a TouchTunes Interactive Networks “prepay and add freight” service, TouchTunes
Interactive Networks shall help the purchaser process the damage claim.

• If the original freight charges were paid in advance-by freight collect or other means-notify the

carrier immediately to initiate a claims inspection. TouchTunes Interactive Networks Customer
Service shall provide assistance, as necessary, to process the freight claim.

• If your returns/repair shipment to TouchTunes Interactive Networks is received in damaged

condition, TouchTunes Interactive Networks shall notify the purchaser. The purchaser shall
need to notify the carrier immediately to initiate a claims inspection. TouchTunes Interactive
Networks Customer Service shall provide assistance, as necessary to process the freight claim.

«
...
116
117
118
119
120
»

Summary of Contents for Allegro MX-1v

























































































































Reviews:

No comments