Maintenance
How to replace the battery
Remote Control
Turn Slowly
Screws
Notch
Battery Cover
Battery
(CR2032)
Hold the remote control firmly
with two hands, then turn on one
side to un-stick it.
Remove the four screws on the
back of the remote control.
Remove the battery cover.
Insert a flat screwdriver into the
notch and lift the cover.
Take out the used battery and
replace it with a new one
(CR2032).
It is easier to pick it out with your
finger tip by holding it upwards.
1.
2.
3.
4.
Replace all four screws to
ensure a water tight seal.
Re-stick remote control back in
place. (See pg. 16)
5.
6.
Be careful not to lose any parts when they
are removed.
Pay attention to the polarity of the battery
and replace it correctly.
You should use only model CR2032 battery.
Follow local regulations for the disposal of
the old battery.
Be careful that water does not enter the
remote control.
All four screws should be installed.
Otherwise, water may enter the remote
control.
How to remove the battery
How to install the battery
15
DISCONTINUED
