Use a soft, clean, damp cloth (not wet) to remove
any dirt or stains on the remote. If necessary, use
a diluted neutral household detergent in water.
Wring out cloth. Cloth should be damp but not
wet.
Do not use any of the following agents as they
will damage the remote:
Acidic detergent, chloride bleach, alkaline detergent solutions like
thinner, benzene cleanser, abrasive powder, detergent with coarse
particles, nylon scrubber, brush
Cleaning the Remote Control
IMPORT
ANT
Ball Nut
Shut-off
valve
Filter
Loosen
Close
Filter
Brush
1. Close the hot and cold
shut-off valves.
2. Open the faucet and push
the remote control in order
to relieve pressure.
3. Loosen the ball nuts under
each solenoid valve until
they disengage from the
shut-off valves.
4. Remove the filters and clean
them with a soft brush.
5. Replace the filters and
tighten the ball nuts.
6. Open the shut-off valves and
check for leaks.
Solenoid Valve
Cleaning the Filter
In order to take full advantage of the product and keep it functioning in good
condition, a regular maintenance schedule should be followed.
Maintenance
12
Maintenance
DISCONTINUED
