Tap once
Tap again
On for
5 seconds
Then Off
The remote control uses 4 “AA” Alkaline Batteries.
It is recommended that you replace the batteries in the controller at least
once a year. If, however, the controller is being used excessively, the
batteries may need to be changed more frequently.
If the battery is dead there is a
chance that the valve will
respond if the remote is
tapped two times. Water will
flow for 5 seconds, then stop.
It is recommended that you replace the
battery before it dies, in order to continue
using the product uninterrupted.
If the battery dies, the solenoid valve will
remain as it is - closed or open, as the
case may be. In either case, the water
should be turned off manually with the
faucet handle.
Replace the batteries in the controller
Adhesion Packing
If the adhesive packing on the
back of the remote control is
dirty, use a damp
(not wet)
cloth
to clean it. Allow packing to dry
out before resticking the remote
control.
Dust may reduce the adhesive force, so it
should be cleared off.
Do not clean the remote control directly with
water.
Clean the adhesive packing
16
Maintenance
DISCONTINUED
