Trouble Shooting
If the remote control battery is used up
Manual Switch
This operation will open the cold/hot-side
solenoid valve and water will flow out. Push
it again to stop the water flow. After the
solenoid valves are open, you can use the
faucet as a regular manually operated one.
For information on how to replace the
remote control battery, please refer to pg. 15
Push the manual switch under
the controller.
If you use the manual switch, the automatic
shut-off of water is also disabled.
In case of no battery power
Manual Switch
This operation will open the cold-side
solenoid valve, so that cold water will flow
out. While there is no battery power you
may continue to use the faucet by turning it
off and on with its handle. After the
batteries are replaced, the faucet will
return to normal operation.
Push the manual switch under
the controller.
The manual switch must be pushed within 90
minutes of the power failure. Otherwise you will
have to wait until the batteries are replaced.
When there is no battery power, the remote
control cannot be used.
In this period, only cold water can be used.
Troubleshooting
19
DISCONTINUED
