background image

Safety Precautions

Read these "Safety Precautions" carefully before using your product to ensure safe use.

 

After reading these precautions, be sure to keep them in a place where they can be referenced at any time by users 
of the product.

 

This manual uses various symbols to indicate information for the safe and correct use of the product, and prevent 
harm to you or other people or damage to property. These indications and their meanings are as follows:

WARNING

Ignoring the text accompanying this indication and handling the product 
incorrectly could result in death or serious injury.

CAUTION

Ignoring the text accompanying this indication and handling the product 
incorrectly could result in injury or property damage.

Items to be observed are classified by type and explained with the following pictograms.

 indicates a prohibited use of the product. The symbol on the left means 

"Do not disassemble".

 indicates a required step in the use of this product.

 

The symbol to the left 

indicates the action is "Required."

Figures and part shapes may differ slightly from the actual product depending on the product part number.

WARNING

Use prohibited 

near water

Never use in a wet place, such as a bathroom, where condensation may 
form on the surface

Doing so may cause a malfunction or current leak.

Do not touch

<For AC type>

Never touch the power terminal with your hands while power is being supplied

Doing so may cause electrical shock.

<For AC type>

Do not touch the controller during thunderstorms

Doing so may cause electrical shock.

Wet hands 

prohibited

Do not plug or unplug the connector with wet hands

Doing so may cause electrical shock.

WARNING

Do not 

disassemble

Do not perform disassembly or alterations other than as described in this 
manual

Doing so may cause fire or electrical shock.
Also, malfunctions such as water shutoff or spray defects may occur or the apparatus may 
be damaged, causing injuries or damage to property due to water leaking onto household 
belongings, etc.

Prohibited

Do not install on moving vehicles such as wheeled vehicles or boats.

Doing so may cause fire, electrical shock, short circuit or malfunction.
The main unit or other parts may fall off, resulting in injury.

<For AC type>

Do not use a power supply other than AC220-240 V

Using an unspecified AC or DC power supply may cause fire or malfunctions.

Do not wash the entire product with water

Doing so may cause a malfunction or current leak.

<For alkaline battery type>

Use only alkaline batteries

Using an oxyride dry-cell battery or the like may cause fire or malfunctions.

<For alkaline battery type>

Do not pull the battery box electric wires

Doing so may disconnect the wires or terminals, or cause a malfunction or electrical shock.

Required

Customers who are impaired in some manner or who have little experience 
or general knowledge (such as children) should only use this product under 
professional guidance

Failure to do so may cause burns, electrical shock, fire or injury.

Do not allow children to use this product as a toy

Failure to do so may cause burns, electrical shock, fire or injury.

For safety, be sure to follow these

2

3

In

tr

o

du
c

tio

n

Summary of Contents for USWN925 Series












Reviews: