18
Motion-
detection
sensor
●
●
When it no longer detects a person, the "Sensor" light on
the Main Unit Display will go off.
When not using automatic open/close
Press the Auto Lid Open/Close
button on the Remote Controller.
This shuts off the automatic open/close.
●
●
"Open/Close" will go out on the Remote Control
Display Module.
●
●
Please follow the same procedure when it is to be
used again.
●
●
The Motion-detection Sensor detects when a person is standing in front of the
toilet.
●
●
Infrared light is emitted from the Motion-detecting sensor as shown in the diagram.
A person is detected when he or she steps into the infrared light.
Motion-detection Sensor
The Auto Seat and Lid
"OPEN/CLOSE"
disappears
After use, move at least 1 foot
(30cm) away from the toilet.
After approximately 90 seconds, the toilet
lid will close automatically.
●
●
When it no longer detects a person, the "Sensor" light on the
Main Unit Display will go off.
When finished, move at
least 1 foot (30cm) away
from the toilet.
●
Please open the toilet seat using the remote
control.
When standing in front of the toilet
Motion-
detection
sensor
Light goes out
When sitting on the toilet seat
After approximately 90 seconds, the toilet
seat and lid will close automatically.
