50
Resupplying the Water
(After draining)
1
Open the shutoff valve.
Check that water is not leaking from a
pipe or the top unit.
2
If the power is not turned ON
Insert the power plug.
3
Discharge water from the
wand.
(1) Pressing down the left side of the
toilet seat,
(2) Press the [REAR] button on the
remote control to discharge water
from the wand.
Catch the water in a paper cup or
other receptacle.
■
If the remaining water has
frozen and no water comes
out
Heat the inside of the bathroom, and
warm the water supply hose and shutoff
valve using a cloth soaked in warm
water.
How to drain the water
1
Remove the side panel (left)
and close the shutoff valve.
(Page 15, Page 51)
2
Drain the pipe.
(Step
2
(1) to (4) on Page 49)
3
Pull out the water
drain lever.
Water comes out from
around the wand
(about 20 seconds)
4
Release your hand
to return the water
drain lever to its
original position.
5
Reinstall the side panel (left).
(Page 15)
6
Take appropriate measures for
the water remaining in the bowl
unit.
Putting antifreeze in the water remaining
in the bowl unit will reduce its chance of
freezing.
■
To use the NEOREST again
The water needs to be resupplied. (See right)
If the toilet is in a location you will not visit for a long time, drain the water.
(The water in the tank may cause malfunctions or become contaminated and cause skin irritation or other problems.)
What to Do?
Long Periods of Disuse
