15
Introduction
2. Turn on the power
1
Remove the side panel and
insert the power plug.
The wand extends and then retracts.
Side panel (right)
Loosen the bottom screw of the side panel (right)
with a flat-head screwdriver, pull the side-panel
diagonally upward, and then pull it out downward.
Screw
(2)
Pull up
(3)
Pull out
(1)Loosen
•
Both side panels can be removed or installed in the
same way.
•
Dropping the side panels may cause damage.
2
Check that the [POWER] LED
on the main display is lit up.
If the LED on the main display is not lit up,
pressing [POWER ON/OFF] will light it up.
3
Reinstall the side panel.
(2) Keep it aligned with the
reference line for panel
installation.
(2)
(1)
(3)
(3) Tighten
(1) Fit it in from
below at an
angle.
Reference line for
panel installation
Keep the side panel (right) aligned with the reference line for panel
installation, and then tighten the bottom screw with a
fl
at-head screwdriver.
To turn the power "OFF"
Press [POWER ON/OFF] to
turn the power off.
The POWER LED goes off.
3. Open the shutoff valve
1
Fully open the shutoff valve.
The shutoff valve is located in the side panel (left).
(Refer to the above for removal and installation.)
Side panel (left)
Operation
