14
Preparation
Using the Product for the First Time
If the remote control is secured
(for anti theft)
1
Remove the screws (2, left
and right) from the remote
control
fi
xture.
(View from side)
Remove
Remote control
Phillips screwdriver
(Fine-tip type)
Screw
(2 pieces, left
and right)
Hanger
Wall
2
Remove the remote control
from the hanger.
Remote
control
Hanger
Wall
■
To secure the remote control again
Tighten and
fi
x the screws (2, left and right).
(Overtightening may cause damage to parts
such as the hanger.)
1. Insert the battery
1
Remove the remote control
from the hanger.
Remote control
Hanger
2
Open the battery cover and
insert two AA batteries.
Close
Open
Battery cover
●
When batteries are properly inserted,
temperature levels appear on the display of
the remote control (back side).
●
The display goes out when no button on
the remote control is pressed for about 60
seconds or more.
WATER TEMP
SEAT TEMP
DRYER TEMP
3
Mount the remote control in
the hanger.
■
About the batteries
●
Use dry cell, alkaline batteries.
Follow the instructions below to prevent the
batteries from rupturing or leaking
fl
uid.
When replacing the batteries, use new batteries of
the same brand.
If you will not be using the remote control for a long
time, remove the batteries.
Do not use rechargeable batteries.
