totalgymdirect.com //
TOTAL GYM
®
// 6
5.
Locate the monitor bracket. Thread the monitor wire through the
monitor bracket. Make sure the monitor wire is safely pulled through
and out of the way, wire should not be caught or kinked between
metal parts as this could damage monitor functionality. Secure the
monitor bracket to the mast using the (2) two allen bolts, (2) two
washers and allen wrench. Start with the top bolt/washer first then
the bottom. Install (2) two AA batteries into the monitor. Connect
the male and female wires together. Next attach the monitor to the
bracket by sliding the top of the monitor halfway into the opening.
Slide the bottom of the monitor all the way in until it is secure.
6A.
Place the seat on the seat carriage. The slit side of the seat
should be towards the back of the unit. Attach seat with the
provided (4) four allen bolts and allen wrench.
6B
.
Locate the handle and attach by twisting open the quick link
and inserting into the metal eyelet on the handle. Screw the
quick link shut to secure the handle onto the cable.
7. Installing Device Holder Attachment:
Locate the device holder
arm. Attach arm under the mast with (4) four allen bolts, (4) four
washers and use the allen wrench to tighten. Locate the device
holder base and twist screw. Secure the base and swivel until in
preferred position. Locate the device holder and using the prongs
insert device holder into the base.
MONITOR
BRACKET
+
+
MONITOR
WIRE
MONITOR
(2) AA BATTERIES
TOP
BOTTOM
(2) ALLEN BOLTS
M6X16
(2) WASHERS
MONITOR
WIRE
ALLEN WRENCH
DEVICE HOLDER
DEVICE
HOLDER
ARM
DEVICE
HOLDER
BASE
(4) ALLEN BOLTS M6X16
(4) WASHERS
TWIST SCREW
ALLEN WRENCH
8.
Your Total Gym Incline Row is now ready to use.
(2) ALLEN BOLTS
M6X50
SEAT
SLIT
SEAT
CARRIAGE
SEAT
(2) ALLEN BOLTS
M6X30
ALLEN
WRENCH
HANDLE
QUICK LINK
EYELET
CABLE
TG_inclinerow_ownersmanual.indd 6
6/1/21 9:45 AM
