20
1. POWER BUTTON
Press On/Off button to turn on or turn off the unit.
NOTE:
Press this button to turn on air conditioner, the unit will operate in Energy Saver mode. If
the unit is energized after power failure, the unit will still operate according to the status before
power failure.
2. MODE BUTTON
Each time you press the button, a mode is selected in a sequence that goes from AUTO, COOL,
SAVE (Energy Saver), FAN and DRY as the following:
AUTO
4
COOL
4
SAVE
4
FAN
4
DRY
3. (-) BUTTON
Press the (-) button once to decrease the set temperature.
Press this button to decrease the set temperature. Pressing this button for 2 continuously
seconds will decrease the temperature quickly.
In AUTO mode, the setpoint temperature cannot be adjusted.
4. (+) BUTTON
Press the (+) button once to increase the set temperature.
Press this button to increase the set temperature. Pressing this button for 2 continuously
seconds will increase the temperature quickly.
In AUTO mode, the setpoint temperature cannot be adjusted.
5. FAN
This button is used to adjust the fan speed in a sequence from AUTO, speed 1, speed 2, speed 3
then back to AUTO.
Auto
Speed 1
Speed 2
Speed 3
6. I FEEL
Once this function is settled, remote control sends the information about room temperature to
the control panel and will adjust automatically. Press again this button to cancel I FEEL function
and the icon disappears.
Please put remote control near the user when this function is chosen. Do not put remote control
near something at high or low temperature in order to prevent false results.
Make sure to keep the minimum distance recommended between the remote control and the
appliance.
After 11 minutes, if the air conditioner does not receive this value from the remote control, the
unit will operate with the room temperature according to the air conditioner; this data will not
be as precise as the one send by the remote control.
NOTE:
The remote control must point at the indoor unit receiving window at all time so that the
control signal is received by the unit.
