9
The power supply cord with this air conditioner contains a current detection device designed to
reduce the risk of fire. Please refer to the section “Instructions for use” for details.
If the power supply cord is damaged, it cannot be repaired. It must be replaced with a cord from
the product manufacturer.
For your safety
• Do not store or use gasoline or other flammable vapors and liquids near this or any other
appliance.
• Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not
remove any prong from the power cord.
Electrical Information
• Be sure the electrical service is adequate for the model you have chosen. This information can
be found on the serial plate, which is located on the side of the cabinet and behind the grill.
• Be sure the air conditioner is properly grounded. To minimize shock and hazards, proper
grounding is important. The power cord is equipped with a three-pong grounding plug for
protection against shock hazards.
• Your air conditioner must be used in a properly grounded wall receptible. If the wall recep-
tible you intend to use is not adequately grounded or protected by a time delay fuse or circuit
breaker, have a qualified electrician install the proper receptible.
• Ensure the receptible is accessible after the unit installation.
• Do not run air conditioner without side protective cover in place. This could result in mecha-
nical damage within the air conditioner.
• Do not, under any circumstances, cut, remove or bypass the grounding prong.
• Do not use an extension cord or an adapter plug.
