11
Note:
when begin installing the GPS receiver, some key points should be noted:
1) The antenna for transmitter should be at least 30cm away from any other antennas.
2) The GPS receiver should be mounted where is far away from any magnet things,
such as icro, nickel, etc. Which may cause interference of compass.
3) The icon of arrow on the GPS receiver should be oriented in the same direction
with the heading direction of boat.
4) After the installation, please check the compass. If you find the compass does not
show proper direction, please calibrate the compass by manual operation. For the
details,
please refer to page 31 (Calibrate Compass of Boat).
1
2
3
4
2)
for general bait boats ( like Anatec, Vegaboat, etc)
Find a proper location on the boat, then fix the GPS bracket on the boat. And finally
install the GPS receiver on the bracket.
