Toshiba VTW2186 User Manual Download

Page: 48 / 64

1/8 Eng Dolby Digital

2/8 Fra Dolby Digital

Off

Subtitles

Turning the Subtitles On and Off

When playing back a disc recorded with subtitles, you can
turn the subtitles on or off.

Press

SUBTITLE

during play-

back until “Off” appears.

Changing the subtitle language

You can select the language when playing back a disc
recorded with multi-lingual subtitles.

Press

SUBTITLE

repeat-

edly during playback until
your desired language ap-
pears.

The on-screen display will disappear after a few seconds.

CHANGING SOUNDTRACK LANGUAGE/SUBTITLES

Press

AUDIO SELECT

during playback.

NOTES:

• If the desired language is not heard after

pressing the

AUDIO SELECT

button sev-

eral times, the language is not recorded on
the disc.

• Changing soundtrack language is can-

celled when you open the disc tray. The
initial default language or available lan-
guage will be heard if the disc is played
back again.

• Changing subtitle language is cancelled

when you open the disc tray.

• Some functions may not work on some

DVDs. You may not be able to turn subti-
tles on or off or change subtitles. While
playing the DVD, the subtitle may change
when:
- you open or close the disc tray
- you change the title.

• In some cases, the subtitle language is not

changed to the selected one immediately.

Press

AUDIO SELECT

repeatedly until the desired
language is selected.

The current soundtrack
language will appear.

The on-screen display will
disappear after a few sec-
onds.

Changing soundtrack language

You can select the language when you play a multilingual
disc.

In case of video CD playback

Audio type changes as follows each time you press

AUDIO

SELECT

➡

1/32 Eng

5N40101B [E] P46-48

5/28/04, 15:24

Summary of Contents for VTW2186

































































Search results

Summary of Contents for VTW2186

Reviews:

Related manuals for VTW2186

Brands by name

Popular brands

Toshiba VTW2186, User Manual

Search results

Summary of Contents for VTW2186

Reviews:

Related manuals for VTW2186

Brands by name

Popular brands