19
TIMER REC SET
AUTO REPEAT
ON
CHANNEL SETUP
TV SETUP
CLOCK SET
EXIT
ENTER
SELECT
: MENU
: ENTER
: /
TIMER REC SET
AUTO REPEAT
OFF
CHANNEL SETUP
TV SETUP
CLOCK SET
EXIT
ENTER
SELECT
: MENU
: ENTER
: /
SPECIAL PLAYBACK
TO VISUALLY SEARCH FOR DESIRED POINTS
When either
(FWD)
or
(REV)
is pressed in the
PLAYBACK mode, the speed search picture will appear.
When pressed twice the search picture will increase in
speed. Speed search times depend upon the speed used
(SP or LP) during recording. To rewind or fast forward a tape,
press
(STOP)
and then press
(REV)
or
(FWD)
.
SPEED SEARCH TIMES
TAPE SPEED
PICTURE SEARCH SPEED
PRESS TWICE
PRESS ONCE
SP (Standard Play)
LP (Long Play)
SP (Standard Play)
PAL
NTSC
7 X
3 X
5 X
7 X
13 X
5 X
Press
(REV)
once or twice in the PLAYBACK mode.
Press
(FWD)
once or twice in the PLAYBACK mode.
To return to playback, press
(PLAY)
.
Press
(PAUSE/STILL)
in the PLAYBACK mode.
To prevent damage to the tape, STILL playback
is automatically resumed to the PLAY mode after
5 minutes.
To continue the normal playback, press
(PLAY)
.
STILL PICTURE
NOTES:
•
The audio output is muted during SPEED SEARCH
and STILL.
•
A few noise bars will appear on the picture during
SPEED SEARCH.
•
It is normal for the picture to be noisy in the STILL
mode.
FRAME ADVANCE
Press
(PAUSE/STILL)
during STILL playback.
SLOW MOTION PLAYBACK
The still picture will advance by one frame each time you
press the button. Hold the button for continuous frame by
frame viewing.
Press
(PLAY)
again to resume normal playback.
NOTE:
SLOW TRACKING AND VERTICAL LOCK ADJUSTMENT
If noise bars appear in the picture during slow motion, press
TRK +
or
–
to reduce the noise bars.
If the still picture jitters excessively, press
TRK +
or
–
to
stabilize the still picture.
Press
]
(SLOW)
in the PLAYBACK mode. Playback will
proceed at 1/5 normal speed. You can change the Slow
Motion speed by pressing the button repeatedly.
The speed of Playback will change from 1/5 to 1/30 normal
speed.
Press
(PLAY)
again to resume normal playback.
Load a NTSC recorded tape
(When loading a cassette tape
without an erase prevention tab,
playback will start automati-
cally).
To play the NTSC tape press
(PLAY)
. Your TV/VCR
will playback Video tapes recorded using NTSC
Standard play, Long play (LP) and Extended play (EP).
However there will be a deterioration in
sound quality in the Long play and Extended play modes.
NTSC TAPE PLAYBACK
Your TV/VCR can playback Video tapes recorded in the
NTSC Colour System (TV system usually used in
America and Japan) on PAL 60Hz TV (Colour system
used in the United Kingdom).
TO WATCH A TAPE REPEATEDLY
NOTE:
To cancel repeat mode, follow above steps 1 and 2,
then press
to select the OFF position. Press
MENU
/
SETUP
to return to the TV.
Press
MENU
/
SETUP
.
Press
or
to select AUTO
REPEAT option.
Press
to select the ON
position.
Press
MENU
/
SETUP
to return to normal TV screen.
If you
press
(PLAY)
, the TV/VCR will repeat playing
the video tape until the repeat mode is cancelled (you
can still stop the tape by pressing
(STOP)
.
1
2
3
For example : 1 press: 30 seconds of tape
2 press: 60 seconds of tape
3 press: 90 seconds of tape
CM SKIP
Press
CM SKIP
in the PLAY mode. The TV/VCR will search
forward through approximately 30 seconds of the tape (e.g.
unwanted commercial time) for each press of
CM SKIP
(maximum six presses) and then resume normal playback.
5N40101B [E] P14-23
5/28/04, 15:22
19
