37
PLAYBACK PROCEDURE
6
Press
PLAY
.
The disc tray closes auto-
matically.
On the TV-screen, “
”
changes to “Reading” and
then playback commences.
• A menu screen will
appear on the TV screen,
if the disc has a menu
feature.
1
Press
(OPEN/CLOSE)
on the unit.
The disc tray will open.
2
Place a disc onto the tray.
Position it with the printed
label side up, align it with
the guides, and place it in
its proper position.
3
Press
/
or
/
to make a selection.
Press
ENTER
.
• Title is selected and play commences.
5
Press
STOP
to end playback.
• The unit memorizes the stopped point, depending on the
disc. “
” appears on the screen. Press
PLAY
to resume
playback (from the scene point).
• If you press
STOP
again or unload the disc (“ ” appears
on the screen.), the unit will clear the stopped point.
7
To stop the playback, press
STOP
.
Then press
(OPEN/CLOSE)
on the unit.
The disc tray opens.
Remove the disc and press
ON/STANDBY
.
The disc tray closes automatically and unit turns off.
NOTES:
• If a non-compatible disc is loaded, “Incor-
rect Disc”, “Region Code Error” or “Paren-
tal Error” will appear on the TV screen ac-
cording to the type of loaded disc. If these
appear, check your disc again (see pages
34 and 50).
• Some discs may take a minute or so to
start playback.
• When you set a single-faced disc label
downwards (ie. the wrong way up) and
press
(PLAY)
or
(OPEN/CLOSE)
on the unit, “Reading” will appear on the
display for approx. 30 seconds and then
“Incorrect Disc” will be displayed.
• Some playback operations of DVDs may
be intentionally fixed by software produc-
ers. Since this unit plays DVDs according
to the disc contents the software produc-
ers designed, some playback features
may not be available. Also refer to the in-
structions supplied with the DVDs.
4
Reading
5N40101B [E] P34-38
5/28/04, 15:23
37
