![background image](http://html.mh-extra.com/html/toshiba/vtw2186/vtw2186_user-manual_431433028.webp)
26
00 : 00 : 05 SP
11 : 30 SAT
HI-FI
STEREO
TV/VCR
1
Press
TV/VCR
to select
TV/VCR mode.
Press
MENU
/
SETUP
. Select
TV SETUP mode using the
or
button, then press
ENTER
.
2
Press
or
to select
NICAM. Then press
to se-
lect the AUTO position. Press
MENU
/
SETUP
repeatedly to
return to normal TV screen.
NICAM STEREO broadcast
"NICAM ST" illuminates when
a NICAM STEREO broadcast
signal is received.
NICAM OFF
It will be displayed for the
NICAM signal when the
"NICAM OFF" is selected in
menu screen.
PLAYBACK
Selection of audio channels - audio channel is selected with
AUDIO
SELECT
according to the chart below.
Hi-Fi signal indication
Press
DISPLAY
.
It will be displayed for approx. 4
seconds when playing Hi-Fi
video cassette tapes.
NICAM STEREO RECORDING AND PLAYBACK
RECORDING
This unit is capable of recording sound in Hi-Fi system. NICAM
STEREO broadcasts are recorded in its original sound system
regardless of the setting. If you wish to record NICAM
programmes, select NICAM "AUTO" as follows.
If the NICAM sound has noise, select the TV station which has
noisy NICAM sound, then set NICAM to OFF.
NOTES:
• When you play a tape recorded in mono, the
sound is always played back in mono regard-
less of the AUDIO select setting.
• If the sound is distorted when playing back
the tape recorded by other Hi-Fi VTR, adjust
with
TRK+
or
–
.
TIMER REC SET
AUTO REPEAT
OFF
CHANNEL SETUP
TV SETUP
COLCK SET
EXIT
ENTER
SELECT
: MENU
: ENTER
:
ON/OFF TIMER SET
AUTO
PICTURE
TV SETUP
NICAM
EXIT
ENTER
SELECT
: MENU
: ENTER
:
/
NICAM OFF
NICAM ST
Mono
Right channel
signal output
from both
loudspeakers.
Left channel
signal output
from both
loudspeakers.
Stereo signal
output from
both loud-
speakers.
On-screen indica-
tions (for 4 sec.)
NICAM Stereo
programme
On-screen indica-
tions (for 4 sec.)
NICAM Stereo
programme
STEREO
HI-FI
R CH
HI-FI
L CH
HI-FI
MONO
5N40101B [E] P24-31
5/28/04, 15:23
26