background image

 

Toshiba Rack Enclosure Installation Manual – 99881-000 

Unintended Usage 

The Toshiba products  listed  in  this document  are  intended  for  usage  in general  electronics  applications 
(computer,  personal  equipment,  office  equipment,  measuring  equipment,  industrial  robotics,  domestic 
appliances, etc.). These Toshiba products are neither intended nor warranted for use in equipment that, if a 
malfunction or failure occurs, may result in loss of human life or bodily injury (collectively referred to as 
“Unintended Usage”). Unintended Usage includes atomic energy control instruments, aircraft or spaceship 
instruments,  transportation  instruments,  traffic  signal  instruments,  combustion  control  instruments,  life 
support equipment, all types of safety devices, etc. Unintended Usage of Toshiba products listed in this 
document shall be made at the customer’s own risk.   

 

Disclaimer 

IN NO EVENT WILL TOSHIBA CORPORATION BE RESPONSIBLE OR LIABLE FOR EITHER INDIRECT 

OR  CONSEQUENTIAL  DAMAGE  OR  INJURY  THAT  MAY  COME  FROM  THE  MISUSE  OF  THIS 

EQUIPMENT.  ANY  MODIFICATIONS  WITHOUT  AUTHORIZATION  BY  TOSHIBA  COULD  RESULT  IN 

PERSONAL INJURIES, DEATH OR DESTRUCTION OF THE UPS. 

 

TOSHIBA  RESERVES  THE  RIGHT  TO  MAKE  CHANGES  WITHOUT  FURTHER  NOTICE  TO  ANY 
PRODUCTS  HEREIN  TO  IMPROVE  RELIABILITY,  FUNCTION  OR  DESIGN.  TOSHIBA  DOES  NOT 
ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR UPS 
DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR 
THE RIGHTS OF OTHERS.

 

 

 

Summary of Contents for TR1X426110

























Reviews: