User’s Manual
8-7
PORTÉGÉ/TECRA R700 Series
Real Time Clock
Password
Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to chapter 5,
for further information.
Internal display panel
Apparent computer's display panel problems may be related to the
Problem
Procedure
The following
message is
Displayed on the
screen:
RTC Power Failure.
Check system. Then
press [F2] key.
The charge in the Real Time Clock (RTC) battery
has run out - you will need to set the date and time
in the BIOS setup application by using the following
steps:
1. Turn on the computer while pressing the
F2
key.
2. Release the
F2
key when the
TOSHIBA Leading
Innovation >>>
screen appears - the BIOS
setup application will load.
3. Set the date in the
System Date
field.
4. Set the time in the
System Time
field.
5. Press
F10
- a confirmation message will be
displayed.
6. Press the
Y
key - the BIOS setup application will
end and the computer will restart.
Problem
Procedure
Cannot enter
password
Please refer to the
section in chapter 6, Power and Power-Up Modes
for further information.
Problem
Procedure
Some letter keys
produce numbers
Check that the numeric keypad overlay is not
activated - press the
FN + F11
hot key and try
typing again.
Output to screen is
garbled
Please refer to your software's documentation to
ensure that its is not remapping the keyboard in any
way (remapping involves changing or reassigning
the function of each key).
If you are still unable to use the keyboard, you
should contact your reseller, dealer or service
provider.
