manualshive.com logo in svg

Toshiba TECRA R700, User Manual

The Toshiba TECRA R700 is a stylish and high-performance laptop designed for professionals on the go. To help you make the most of its features, we offer a comprehensive User Manual, available for free download on our website. Explore the full potential of the TECRA R700 with our user-friendly manual at manualshive.com.

Share
Download
background image

User’s Manual

4-19

PORTÉGÉ/TECRA R700 Series

■

If the disc is poor in quality, or is dirty or damaged, writing or rewriting 
errors may be noted - ensure that you check all discs for dirt or damage 
before you use them.

■

The actual number of rewrites to CD-RW, DVD-RW, DVD+RW or DVD-
RAM media will be affected by the quality of the disc itself and the way 
in which it is used.

■

There are two types of DVD-R media available, authoring discs and 
general use discs. Do not attempt to use authoring discs as only 
general use discs can be written to by a computer drive.

■

You can use both DVD-RAM discs that can be removed from a cartridge 
and DVD-RAM discs designed without a cartridge.

CD-R:

TAIYO YUDEN CO., Ltd.

MITSUBISHI KAGAKU MEDIA CO., LTD.

CD-RW: (Multi-Speed, High-Speed and Ultra-Speed)

MITSUBISHI KAGAKU MEDIA CO., LTD.

DVD-R:

DVD Specifications for Recordable Disc for General Version 2.0

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media)

Panasonic Co.,Ltd. (for 4x and 16x speed media)

TAIYO YUDEN Co.,Ltd. (for 4x, 8x and 16x speed media)

Hitachi Maxell,Ltd. (for 8x speed media)

DVD+R:

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media)

DVD-RW:

DVD Specifications for Recordable Disc for Version 1.1 or version 1.2

Victor Company of Japan, Ltd. (JVC) (for 2x, 4x and 6x speed media)

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2x, 4x and 6x speed media)

DVD+RW:

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2.4x and 4x speed media)

DVD-RAM: (DVD Super Multi drive only)

DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or 
Version 2.2

Panasonic Co.,Ltd. (for 3x and 5x speed media)

Hitachi Maxell,Ltd. (for 3x and 5x speed media)

■

This drive cannot use discs that allow writing faster than 16x speed 
(DVD-R and DVD+R media), 8x speed (DVD+RW media), 6x speed 
(DVD-RW media), 5x speed (DVD-RAM media).

■

2.6GB and 5.2GB DVD-RAM media cannot be read from or written to.

Summary of Contents for TECRA R700







































































































































































































Reviews:

No comments

Related manuals for TECRA R700

Acer A515-47 User Manual preview
A515-47
Brand: Acer Pages: 77
FIC KR2W User Manual preview
KR2W
Brand: FIC Pages: 128
Compaq Presario V3500 - Notebook PC Maintenance And Service Manual preview
Presario V3500 - Notebook PC
Brand: Compaq Pages: 175
Acer TravelMate 4750 Quick Manual preview
TravelMate 4750
Brand: Acer Pages: 315
Acer TravelMate 520 Series User Manual preview
TravelMate 520 Series
Brand: Acer Pages: 83
Maibenben MaiBook S E-Manual preview
MaiBook S
Brand: Maibenben Pages: 44
Fujitsu AMILO Pro V2040 Service Manual preview
AMILO Pro V2040
Brand: Fujitsu Pages: 38
Fujitsu CELSIUS H250 Operating Manual preview
CELSIUS H250
Brand: Fujitsu Pages: 85
Fujitsu b2178 Manual preview
b2178
Brand: Fujitsu Pages: 89
Fujitsu A1130 - Lifebook T6500 4GB 500GB Specifications preview
A1130 - Lifebook T6500 4GB 500GB
Brand: Fujitsu Pages: 2
Fujitsu AMILO Pi 3560 Datasheet preview
AMILO Pi 3560
Brand: Fujitsu Pages: 6
Fujitsu AMILO Pa 1538 Easy Manual preview
AMILO Pa 1538
Brand: Fujitsu Pages: 84
Fujitsu Amilo Li3710 Specifications preview
Amilo Li3710
Brand: Fujitsu Pages: 6
Fujitsu AMILO Pa 2510-25P Datasheet preview
AMILO Pa 2510-25P
Brand: Fujitsu Pages: 2
Fujitsu AMILO Sa 3650 Datasheet preview
AMILO Sa 3650
Brand: Fujitsu Pages: 6
Fujitsu AMILO Pi 2550 Datasheet preview
AMILO Pi 2550
Brand: Fujitsu Pages: 3
Fujitsu AMILO Pro V3205 Datasheet preview
AMILO Pro V3205
Brand: Fujitsu Pages: 3
Fujitsu CELSIUS H700 Operating Manual preview
CELSIUS H700
Brand: Fujitsu Pages: 106

Brands by name

Popular brands

Load more brands