manualshive.com logo in svg

Toshiba TECRA R700, User Manual

The Toshiba TECRA R700 is a stylish and high-performance laptop designed for professionals on the go. To help you make the most of its features, we offer a comprehensive User Manual, available for free download on our website. Explore the full potential of the TECRA R700 with our user-friendly manual at manualshive.com.

Share
Download
background image

User’s Manual

5-4

PORTÉGÉ/TECRA R700 Series

panel brightness in individual steps.

Brigtness Up:

 Pressing 

FN + F7

 increases the computer's display panel 

brightness individual steps.

Wireless:

 Pressing 

FN + F8

 switches the active wireless devices.

Touch Pad: 

Pressing 

FN + F9

 enables or disables the Touch Pad function.

Zoom:

 Pressing 

FN + Space

 changes the display resolution.

ODD:

 Pressing 

FN

 +

Tab

 turns the power of the optical disc drive on/off or 

ejects the disc tray.

TOSHIBA Zooming Utility (reduce): 

Pressing 

FN + 1

 reduces the icon 

size on the desktop or the font sizes within one of the supported application 
windows.

TOSHIBA Zooming Utility (enlarge): 

Pressing 

FN + 2

 enlarges the icon 

size on the desktop or the font sizes within one of the supported application 
windows.

Volume down: 

Pressing 

FN + 3

 decreases the volume in increment.

Volume up:

 Pressing 

FN + 4

 increases the volume in increment.

FN Sticky key

You can use the TOSHIBA Accessibility Utility to make the 

FN

 key sticky, 

that is, you can press it once, release it, and then press an "F Number" key. 

+

+

If no wireless communication device is installed, no dialog box will appear.

+

+

+

+

+

+

+

Summary of Contents for TECRA R700







































































































































































































Reviews:

No comments

Related manuals for TECRA R700

Panasonic CF-45 Series Operating Instructions Manual preview
CF-45 Series
Brand: Panasonic Pages: 32
Panasonic CF-30 Series Operating Instructions Manual preview
CF-30 Series
Brand: Panasonic Pages: 40
Panasonic CF-25 Operation Instructions Manual preview
CF-25
Brand: Panasonic Pages: 46
IBM Dock II User Manual preview
Dock II
Brand: IBM Pages: 170
IVIEW i330nb User Manual preview
i330nb
Brand: IVIEW Pages: 16
Sony SVS1511JFXB Specifications preview
SVS1511JFXB
Brand: Sony Pages: 2
Sony SVS1511HGXB Specifications preview
SVS1511HGXB
Brand: Sony Pages: 2
Sony SVS1511CFXB Specifications preview
SVS1511CFXB
Brand: Sony Pages: 2
Sony SVS1511DGXB Specifications preview
SVS1511DGXB
Brand: Sony Pages: 2
Sony SVS1511BFXB VAIO Specifications preview
SVS1511BFXB VAIO
Brand: Sony Pages: 2
Sony SVP11213CXS Specifications preview
SVP11213CXS
Brand: Sony Pages: 2
Sony SVT1121 How To Use Manual preview
SVT1121
Brand: Sony Pages: 251
Sony SVF1432 User Manual preview
SVF1432
Brand: Sony Pages: 474
Toshiba Satellite L505D Product Specification preview
Satellite L505D
Brand: Toshiba Pages: 3
Toshiba Satellite L515 Specifications preview
Satellite L515
Brand: Toshiba Pages: 4
Toshiba Satellite L505-S6959 Specifications preview
Satellite L505-S6959
Brand: Toshiba Pages: 3
Toshiba Satellite L505-S5997 Specifications preview
Satellite L505-S5997
Brand: Toshiba Pages: 4
Toshiba Satellite L505-S5995 Specifications preview
Satellite L505-S5995
Brand: Toshiba Pages: 4

Brands by name

Popular brands

Load more brands