Basic Installation and Operation Guide
TE Series Digital Solid State Soft Starters 18 – 1250A
29 |
P a g e
5.4.5.c
Automatic Reset
The
TE Series
starter provides for automatic reset on certain non-
critical faults and Overload. For non-critical fault resets, see section
5.6.8 for program details of
F052
and
F053
. For automatic Overload
reset, see section 3.1 and 5.6.1 for programming details.
5.4.5.d
Lockout Functions
Lockout functions such as Minimum Time Between Starts and Starts
per Hour are not true fault conditions. They are based on the internal
Real Time Clock (RTC). When control power is removed, the RTC
value is quickly stored. Upon return of power, the timer values are
updated from the RTC for elapsed time. If the Lockout Time has not
expired, the
TE Series
cannot be started. To reset the Lockout
Times for emergency restart, see section 5.6.11, under
F071
.
5.4.5.e
Changing to Default Screen During Fault
In some cases it may be necessary to alter programmed parameters
in order to test or make changes to clear a fault (such as Phase
Loss) or to view the more detailed fault history in F085 – F097. To
accomplish this, you must get to the Status Screen so the Fn button
becomes active. When in a Fault Screen, pressing the Right or Left
Arrow buttons will take you to the Status Screen. From there, you
can press the
[Fn]
key to enter the Programming Mode and move to
different functions.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
