23
Preparations
22
Placement Styles
As shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the
Default setting menu
p.44
, in accordance with your needs.
Placement
WARNING
• Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit.
Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus
resulting in injury.
• If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the
projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge.
Improper mounting could cause the projector to fall, resulting in an accident.
• If the projector is ceiling-mounted, install the breaker for turning off the power in case of anomaly. Let
everyone involved with the use of the projector know that fact.
Floor-mounted front projection
Floor-mounted rear projection
Ceiling-mounted front projection
Ceiling-mounted rear projection
Projection Distance and Size
Use the figures, tables, and formulas below to determine the projection size and projection distance.
(Projection sizes are approximate values for full-size picture with no keystone adjustment.)
Screen
As seen from above
As seen from the side
90
°
a
90
°
H
Lens center
a (min length) =
projection size (inches) – 1.552
32.929
a (max length) =
projection size (inches) – 1.0087
21.735
projection
projection distance a (m)
height (H)
min length
max length
size (inches)
(zooming max) (zooming min)
(cm)
33
–
1.17
6.8
40
1.17
1.79
8.2
60
1.77
2.71
12.3
80
2.38
3.63
16.5
100
2.99
4.55
20.6
150
4.51
6.85
30.9
200
6.03
9.16
41.1
250
7.54
11.46
51.4
300
9.06
13.76
61.7
a
is the distance (m) between the lens and the screen, and corresponds to a range of 1.17 m to 13.76
m.
H
is the height from the image bottom to the center of the lens.
Summary of Contents for TDP-TW300
Page 47: ......
